Signalyzer ARM JTAG Starter Kit. All you need to interface to a standard ARM 20-pin JTAG target device or board.
The kit package contains:
Signalyzer H2 Features and Specifications
-
Modular design approach for most flexibility
-
USB powered
-
USB 2.0 High Speed ( USB 2.0 up-to 480Mbit/sec)
-
Dimensions: 45mm x 40mm x 13mm
-
2 independent configurable channels
-
Up to 22 configurable GPIO lines per side
-
5VDC output with soft start, overcurrent and thermal protection (requires powered USB hub)
-
Supports most popular Serial Protocols ( SPI, JTAG, I2C, UART ), support for additional protocols may be realized with Bit-bang modes.
-
JTAG TCK up-to 30MHz with true RTCK support.
- Parallel interface modes of operation including High-speed FIFO, Asynchronous and Synchronous Bit-bang modes.
- 3 user controllable bi-color LEDs (RED / GREEN)
- 2 10-bit ADC Input per side
- 1 PWM output per side
- I2C bus for Accessory modules control and configuration
- GPIO is 3.0V - 5.0V capable. (GPIO voltage range can be expanded with use of variety of Accessory modules and can be expanded to 1.15V - 5.5V or fully isolated mode)
- 100mA power consumtion (without external connections or modules)
- Expandable with range of Accessory Modules
- Accessory Module type detection
- Field upgradeable firmware
- Two IDC 0.1" 26-pin dual row connectors.
ARM JTAG 20pin Level Translating adapter module with Adjustable Power Supply Specifications
- Target voltage range: 1.65VDC - 5.5VDC
- Target voltage sensing and readout ability (This feature is currently not supported in OpenOCD)
- 24mA output drivers
- JTAG TCK up-to 30MHz
- RTCK signal support
- 1.00VDC - 4.75VDC programmable power supply (output routed to pin 19 of ARM JTAG connector)
- Up-to 500mA output. (Requires powered USB Hub)
- Power supply current sensing and readout
- ESD Protection Exceeds JESD 22
– 2000-V Human-Body Model
– 200-V Machine Model
– 1000-V Charged-Device Mode
Compatible software
documents
Signalyzer Driver for Win32 and Win64 (2.06.00)
libftd2xx Signalyzer and Signalyzer LITE driver for Linux (x86_32)