Signalyzer

Shopping Cart

Your Cart is currently empty.
Login
Username

Password

Remember Me

View Full-Size Image

Signalyzer

PN: DT-USB-ST

$79.00

Availability

This product is currently not available.
Usually ships in:

This product is now obsolete and has been replaced with new Signalyzer H series products. For additional information please visit corresponding product web page:

Signalyzer ARM JTAG PSU Starter Kit

Description
Documents
Downloads
Starter Kits
Adapter

Signalyzer Tool is a multifunction test instrument. Dual channel design provides two individually configurable dedicated channels. Whether you need JTAG Boundary-Scan interface to program and debug your design; or your project requires access to SPI or I2C buses or UART communication and control of I/O lines at logic levels – all of these can easily be accomplished with Signalyzer tool.

Flexible API and Open Source development further extends the capabilities of the tool allowing you to customize the functionality or even develop your own applications using broad range of development tools for Linux and Windows environments.
With help of Open On-Chip Debugger Signalyzer Tool becomes a very powerful JTAG debugging platform for ARM based processors.

Support for Signalyzer Tool is fully integrated into Symphony™ Studio Integrated Development Environment for developing technology for Symphony DSP from Freescale and provides developers USB debugging facilities.

Capabilities:

2 Channels
On-Chip Debugging (OCD)
In-system Programming (ISP)
Boundary Scan Testing (JTAG)
ARM cores debug
Freescale DSP563xx debug
SPI bus host controller
I2C bus host controller
UART
Up to 16 pins of GPIO

Features:

USB2.0 - Full-speed, 12Mbits/sec
USB powered
JTAG / IEEE 1149.1 compatible
Supports: JTAG, I2C, SPI, UART and 8 bit GPIO interfaces
Based on FTDI FT2232C/L device
Two independent channels with own Vext supplies
I/O signals are compatible across 1.2V - 5.5V signal range with ext. Vref
All I/O lines are ESD protected
All I/O lines are short-circuit protected
Over-voltage and over-current protection on Vext supplies
Programmable baud rate up-to 6Mbits/sec
Free drivers for Linux, Windows XP, 2000, 2003, CE platforms
Open source debugger support
API to allow to further extend capabilities

Freescale DSP563xx

Signalyzer Tool,when coupled with Symphony Studio software from Freescale Semiconductor provides support for programming and debugging DSP563xx series of DSPs

WinARM

WinARM installer are available for download in the Downloads section.

WinARM is a collection of GNU and other tools to develop software for the ARM-family of controllers/processors on MS-Windows-hosts. Unlike other collections WinARM does not depend on a cygwin or mingw-environment. All needed tools are in the distribution-package. Special thanks to Martin THOMAS, the maintainer of this package, for his excellent work.

YAGARTO

Michael Fischer, who’s supporting OpenOCD with his Windows installer packages and how-to articles (among other things), maintains site for his “Yet Another Gnu ARm TOolchain (YAGARTO) ”. It provides windows installer packages for OpenOCD, the GNU ARM toolchain and an integrated development environment using Eclipse and the Zylin CDT plugin. What makes YAGARTO special is that it runs completely native on Windows, i.e. it’s fully based on MinGW and doesn’t require Cygwin. YAGARTO tool set fully supports Signalyzer Tool as well as contains all the nessessary drivers.

Supported targets and operation modes

Target	Channel		Notes
Target	A	B	Notes
ARM7TDMI	√		Supported with OpenOCD and JTAG mode of Signalyzer Tool on Channel A.
ARM7TDMI-S	√
ARM720T	√
ARM920T	√
ARM922T	√
ARM926EJ-S	√
Intel Xscale	√
Cortex-M3	√
LPC2xxx flash	√
STR7xx flash	√
AT91SAM7	√
CFI Flash	√
DSP563xx	√		Supported using Freescale's Symphony Studio and JTAG mode of Signalyzer Tool on Channel A.
Xilinx CPLD	√		Supported with OpenOCD and JTAG mode of Signalyzer Tool on Channel A.
XSVF	√		Supported with OpenOCD and JTAG mode of Signalyzer Tool on Channel A. Currently only Xilinx CPLD are supported.
JTAG	√		Channel A of Signalyzer Tool provides support for generic JTAG interface. Supported with FTDI FTCJTAG.DLL API and with Signalyzer.DLL for .NET 2.0 developments. Visit download section for details.
SPI	√		Supported on Channel A with FTDI FTCSPI.DLL API and with Signalyzer.DLL for .NET 2.0 developments. Visit download section for details.
I2C	√		Supported on Channel A with FTDI FTCI2C.DLL API and with Signalyzer.DLL for .NET 2.0 developments. Visit download section for details.
GPIO	√	√	Each channel of Signalyzer tool can be used as 8 discrete GPIO lines with logic level 1.2V and 5.5V. "I/O Wiggler" application (available in Download section) enables the control of GPIO and execution of simple time defined line toggling scripts.
UART	√	√	Each of the Signalyzer channels can be configured as full UART with logic level between 1.2V and 5.5V. This gives up to two serial ports to connect to your target.